Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
piep:examples:accel [2019/04/12 16:36]
jonathan
piep:examples:accel [2019/04/16 00:57] (current)
venkat
Line 36: Line 36:
  
  
-Before working on this example, make sure you have set the latest **koliada SDK**. More information on setSDK setup and setting the path is shown [[kes:​software:​koliadaes_sdk|here]]. ​+Before working on this example, make sure you have set the latest **KoliadaESDK<​sup>​(TM)</​sup>​**. More information on setSDK setup and setting the path is shown [[kes:​software:​koliadaes_sdk|here]]. ​
  
-**Note:** After making sure the SDK path is set, you must know that the board config must be flashed only if you are using any I/O pins. In this particular example there are  I/O configurations for the LED and Switch and hence you should open the accel config project in visual studio. You can find the project under koliadaSDK->​examples->​AccelConfig.+**Note:** After making sure the SDK path is set, you must know that the board config must be flashed only if you are using any I/O pins. In this particular example there are  I/O configurations for the LED and Switch and hence you should open the accel config project in visual studio. You can find the project under KoliadaESDK<​sup>​(TM)</​sup>​->​examples->​AccelConfig.
  
 Select the SDK using the SDK Dropdown button at the top. Select the SDK using the SDK Dropdown button at the top.
Line 52: Line 52:
 ===== Step 3 ===== ===== Step 3 =====
  
-Now since the I/O ports for the LED and the Switch are configured by downloading the config project we can move on to download the application firmware. You find the application firmware for LED and Switch examples under koliadaSDK->​examples->​accel.+Now since the I/O ports for the LED and the Switch are configured by downloading the config project we can move on to download the application firmware. You find the application firmware for LED and Switch examples under KoliadaESDK<​sup>​(TM)</​sup>​->​examples->​accel.
  
 Now compile the project and hit download to target. ​ Now compile the project and hit download to target. ​
      Copyright © 2018-2019 Koliada, LLC
  • piep/examples/accel.txt
  • Last modified: 2019/04/16 00:57
  • by venkat