Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
piep:examples:terminal [2019/04/16 01:09]
venkat
piep:examples:terminal [2019/04/16 01:11] (current)
venkat [Step 1]
Line 52: Line 52:
 **Note:** After making sure the SDK path is set, you must know that the board config must be flashed only if you are using any I/O pins. In this particular example, there are I/O configurations for the LED and Switch, and hence you should open the Terminal_Breakout config project in visual studio. You can find the project under KoliadaESDK<​sup>​(TM)</​sup>​->​examples->​Terminal_BreakoutConfig. **Note:** After making sure the SDK path is set, you must know that the board config must be flashed only if you are using any I/O pins. In this particular example, there are I/O configurations for the LED and Switch, and hence you should open the Terminal_Breakout config project in visual studio. You can find the project under KoliadaESDK<​sup>​(TM)</​sup>​->​examples->​Terminal_BreakoutConfig.
  
-/*Select the SDK using the SDK Dropdown button at the top.*/+Select the SDK using the SDK Dropdown button at the top.
  
 ===== Step 2 ===== ===== Step 2 =====
      Copyright © 2018-2019 Koliada, LLC
  • piep/examples/terminal.txt
  • Last modified: 2019/04/16 01:11
  • by venkat